屈曲约束支撑的缺陷影响分析.pdfVIP

第 24 卷第 1期 结 　构 　工 　程 　师 Vo l. 24 , No. 1 2008年 2 月 Structu ral Engineers Feb. 2008 屈曲约束支撑的缺陷影响分析 1, 2 1 2 王仁华 　俞铭华 　谢步瀛 ( 1. 江苏科技大学 ,镇江 2 12003; 2. 同济大学土木工程学院 ,上海 200092) 摘 　要 　对屈曲约束支撑在施工过程中容易产生的套管与核心部分间空隙尺寸偏差和核心板厚偏差进 行研究 。借助 AN SYS有限元软件 ,分析这两类施工缺陷对屈曲约束支撑临界荷载的影响 ,得出了缺陷 影响的曲线和图表 ,结果表明空隙尺寸偏差和板厚偏差对支撑的弹性临界荷载影响明显 ,设计和施工过 程应该严格控制 。另外 ,文中提供的曲线图表可应用于设计中预估屈曲约束支撑临界荷载 ,应用有限元 方法可拓展屈曲约束支撑的试验研究 ,减少试验成本 。 关键词 　屈曲约束支撑 , 施工缺陷 , 有限元 , 极限荷载 Analysis of Deflection ’s Influence on BucklingRestrained B races 1, 2 1 2 WAN G R enhua 　YU M inghua 　X I E B uying ( 1. J iangsu U n iversity of Science and Techno logy, Zhenj iang 2 12003, Ch ina; 2. D ep artm ent of Bu ilding Engineering, Tongj i U n iversity, Shanghai 200092 , Ch ina) A b stract　Two k ind s of in itial fab rication deflection s of buck lingre strained b race s (BRB s) were studied, in clud ing the deflection of the th ickne ss of the steel core and the gap between the steel tube and the steel core. By the fin ite elem en t software, AN SYS, such two sorts of fab rication deflection s were inve stigated. Som e fig u re s and cu rve s were ob tained and the re su lts show that the deflection s obviou sly influence the critical load of BRB s. In addition , such figu re s and cu rve s can be u sed to foreca st the critical load s of the BRB s du ring the de sign stage, and the fin ite elem en t m ethod can w iden the exp erim en tal inve stigation s and reduce the exp eri m en tal co st. Keywords　buck lingre strained b race, fab