对称较宽通带双工器的直接设计法.pdfVIP

_______________________________________________________________________________ Direct Design of Symmetrical Interacting Broader Bandwidth Parallel Diplexers Wen-Sheng Zhou and Yi-Sheng Zhu Dalian Maritime University, Dalian 116026, China Abstract — Explicit design formulas are given for the responses in the two channels will be asymmetric. In symmetrical broader bandwidth parallel diplexers, where this paper, we extend Rhodes’ method to the design of the diplexer consists of two bandpass channels connected to a common port, and the two bandpass channels with same diplexers with relatively broader passbands. band width and operating at different center frequencies are Furthermore, because in a directly series-connected derived from same lowpass prototype. The modified element diplexer the two channels can not have common ground values of the corresponding lowpass prototypes are together with the common port, and in a parallel diplexer expanded as power series in well defined band-separation based upon series -resonant filters all inductors are factors separately, and the input admittances of the both channels are expressed as functions of the modified element suspended, sometimes both kinds of diplexers are values. To keep all zero reflection frequencies of the lowpass difficult to realize in practice. Also, to exceed the prototype as corresponding zero reflection frequencies of the limitation of element values, usually impedance corresponding channel, the coefficien