不同加载角度下Z形截面钢筋溷凝土柱抗震性能研究(论文资料).pdfVIP

40 7 20107 Z * 1 1 2 2 2 应义淼 , 陈瑞生 , 杨俊杰 , 季 青 , 朱振华 ( 1 , 310032; 2 , 310032) [ ] ANSYS Z , (0~ 165), Z = 60, , , ,, = 60 [ ] Z ; ; ; Study on seismic behavior of Zshaped RC columns under different load angles 1 1 2 2 2 Ying Yimiao , Chen uisheng , Yang Junjie , JiQing , Zhu Zhenhua ( 1The Architectural and Planning Design and esearch Institute of Zhejiang University of Technology, Hangzhou 310032, China; 2 College of Civil Engineering and Architecture, Zhejiang University of Technology, Hangzhou 310032, China) Abstract:According to numerical simulation analysis by ANSYS of behavior of Zshaped C columns subjected to lowcyclic horizontal load, the shear capacity, ductility and energyconsumption capacity were studied under different load angles, which arranged from 0 to 165. The results show that changes of load angle has a great impact on behavior of Zshaped C columns. The horizontal carrying capacity and the ductility factor reach the minimum as = 60, and at the same time the horizontal displacement reaches the maximum. Proposal: besides working on the two principal axes, the carrying capacity, stiffness and limited displacement about = 60 should be calculated in the practical design. Keywords: Zshaped C column; lowcyclic load; load angle; carrying capacity 0 , Z 1 , 11 , [ 1] , Z Z3 Z, , 11 , , [1] , [2] , Z