抗弯刚度对主缆线形的影响.pdfVIP

22 2011 1 : 1003- 4722( 2011) 01- 0022- 04 1 1 2 1 严 琨 , 沈锐利 , 陈卫国, 唐茂林 ( 1. 西南交通大学桥梁系, 四川成都610031; 2. 浙江省舟山连岛工程建设指挥部, 浙江 舟山316000) : 随着悬索桥跨径的不断增加, 主缆截面也越来越大, 主缆的 弯刚度对主缆的线形将 产生一定的影响, 通过建立考虑 弯刚度的主缆线形计算公式, 提出主缆与鞍座切点的修正方法 建立不同边界条件和有无鞍座的主缆有限元计算模型, 分析 弯刚度对主缆线形的影响结果表 明: 弯刚度对主缆的线形影响较大; 弯刚度越大, 主缆与鞍座的切点越靠近鞍座顶部; 当跨中垂 度不变时, 随着 弯刚度的增大, 弯刚度对主缆线形影响的最大位置由鞍座处向跨中移动; 当垂 度变化时, 随着主缆水平张力的增大, 弯刚度对主缆线形影响的最大位置由跨中向鞍座处移动; 考虑鞍座时会减小 弯刚度对主缆线形的影响 : 悬索桥; 主缆; 弯刚度; 线形; 鞍座 : U448. 25 : A Influence of Bending Rigidity on Geometric Shape of Main Cable 1 1 2 1 YAN Kun , SHEN Rui-li , CHEN Wei-guo , TANG Mao-lin ( 1. Department of Brid e En ineerin , Southw est Jiaoton University, Chen du 6 10031, China; 2. Zhejian Pro- vincial Construction H eadquarters of Zhoushan Mainland and Islands Link Project, Zhoushan 316000, China) Abstract: W ith the constant increase of span len th of suspension br id e, the section of main cable of the brid e becomes lar er and lar er and the bendin ri idity of the main cable w ill exert certain influence on the eometr ic shape of the cable. By w ay of creatin a calculation formula for the eometr ic shape of the cable, takin into consideration of the bendin ri idity, the modifica- tion method for tan ent point betw een the cable and cable saddle is put forw ard, the finite ele- ment calculation models for different boundary conditions and for the cable w ith and w ithout sad- dles are established and the influence of the bendin ri idity on the eometr ic s