汽轮机叶片流固耦合方法研究.pdfVIP

汽轮机叶片流固耦合方法研究 [周俊杰，郭朋飞] [郑州大学，450001] [ 摘 要 ] 叶片是汽轮机中使用最多的一类零件，一台汽轮机有数千件叶片，叶片的质量直接关系到汽轮 机的工作效率。因此，开发出高效率、高强度的叶片是一项重要的基础工作。本文以某型号凝 汽式汽轮机中压缸某级为研究对象，讨论了Ansys Workbench 中汽轮机叶片流固耦合的分析 方法：首先运用 Solidworks 建立动静叶片的单流道模型以及动叶片模型，然后利用 Ansys CFX 对单流道模型进行流场分析，最后用 Ansys Workbench 对动叶片模型进行流固耦合分析。最 终评价了汽轮机叶片的综合性能。 [ 关键词 ] 汽轮机叶片 Ansys Workbench 流固耦合 The Research of Turbine Blade’s Fluid-solid Coupling Method [Zhou Junjie, Guo Pengfei] [ZhengZhou Univercity, 450001] [ Abstract ] Turbine blade is the most amouts of parts being used in turbine, a steam turbine has thousands of pieces of blade, and the quality of blade is directly related to the efficiency of steam turbine. Therefore, developing high efficiency and strength blade is an important basic work. In this paper, a condensing steam turbine’s intermediate pressure cylinder is being used as the research object, we discussed the fluid-solid coupling analysis method in Ansys Workbench: Firstly using Solidworks to establish the single flow channel model for stator blade and rotor blade, then proceeding flow analyze to the single flow channel model using Ansys CFX, finally using fluid-solid coupling analysis method analysising the rotor blade model using Ansys Workbench.Based on the analysising, evaluation the comprehensive performance of turbine blade. [ Keyword ] turbine blade Ansys Workbench the fluid-solid coupling 1 前言 工业汽轮机在我国的能源和工业生产中使用广泛，因此工业汽轮机的研发和应用占有十分 [1] 重要的地位 。作为汽轮机安全的关键因素，叶片可靠性研究越来越被人们重视。在汽轮机内 部，流体与结构叶片之间存在着相互作用：一方面, 叶片在气动力的作用下产