超声波电源的设计.doc

集 美 大 学 毕业设计论文 毕业设计题目 设计 专 业 机械自动化 班 级 机 姓 名 学 号 200 指导教师 胡 玉 生 职 称 副教授 机械工程学院 2010年 6月2日 几十年来，超声加工技术的发展迅速，在、加工、、超声复合加工领域均有较广泛的研究和应用，解决了许多关键性的工艺问题，取得了良好的效果。，然后详细分析了超声波设备的组成、关键技术以及设计难点，方案设计、制作了超声波发生器The Design Of Ultrasonic Power Abstract The development of ultrasonic machining technology is rapid for decades. Type holes and cavity machining, cutting, ultrasonic cleaning, ultrasonic processing, and ultrasonic welding have a wider field of research and application, solves many key technology issues , achieved good results This paper introduces the domestic and international aspects in the development of ultrasonic power first. Then a detailed analysis of the composition of ultrasonic equipment Key technologies and design difficulties And design a 200w ultrasonic generator which is used in ultrasonic machining .Through the power of analog and digital ultrasound description of the basic circuit, Learn about the frequency of ultrasonic power tracks, power control, steady speed, overvoltage, overcurrent and impedance matching key technologies. Then designed circuits to all parts of the circuit analysis and design. On this basis , Details of the rectifier circuit, filter circuit, push-pull inverter circuit, impedance , Ultrasonic generator and the matching design of transducer and PCB design using Protel software , and then proceed to circuit board production and testing. Finally, the design characteristics of the circuit of induction have summed up and summarized. Key words: ultrasonic generator; ultrasonic transducer; frequency tracking; Impedance matching; half-bridge inverter circuit 目 录 摘要 I Abstract II 引言 1 1 超声加工技术 4 1.1 超声波加工的原理 4 1.2 超声波加工的特点 4 1.3 超声波加工的应用 5 2 模拟与数字超声电源的基本电路 7 2.1 模拟电路超声波发生器 7 2.1.1 超声波振荡器 7 2.1.2 超声波放大器 7 2.2 数字超声波发生器 7 2.3 频率跟踪 9 2.4 功率控制 11 2.4.1 输出功率控制系统 11 2