rx62n_Communication with EEPROM using RIIC.pdf

APPLICATION NOTE RX62N Group, RX621 Group R01AN0268EJ0100 Communication with EEPROM Rev.1.00 2 Using the Renesas I C Bus Module (RIIC) Feb 14, 2011 Introduction This application note presents a sample program that communicates with an EEPROM (in single master mode) using the Renesas MCU I2C bus interface module. Target Device The RX62N Group and RX621 Group products Other members of the RX Family that have the same I/O registers (peripheral unit control registers) as the RX62N Group and RX621 Group products can also use the code from this application note. Note, however, that since certain aspects of the functions used may be changed in other devices due to function additions or other differences, the documentation for the device used must be checked carefully before using this code. When using this code in an end product or other application, its operation must be tested and evaluated thoroughly. Contents 1. Specifications 2 2. Operation Confirmation Environment 3 3. Operation 4 4. Software 6 5. Reference Documents 28 R01AN0268EJ0100 Rev.1.00 Page 1 of 29 Feb 14, 2011 2 RX62N Group, RX621 Group Communication with EEPROM Using the Renesas I C Bus Module (RIIC) 1. Specifications This sample program communicates with the EEPROM to write 8 bytes of data and then read the written data back. Between the