An LC filter design method for single-phase PWM inverters.pdfVIP

An LC Filter Design Method for Single-phase PWM Inverters Pekik A. Dahono, Agus Purwadi,and Qamaruzzaman Laboratorium Penelitian Konversi Energi Elektrik, Jurusan Teknik Elektro, Institut Teknologi Bandung, J1. Ganesha No. 10, Bandung 40132, INDONESIA Abstract current and voltage of the LC filter are derived. As the unique values of the parameters of the LC filter In this paper, an analysis and design method of the can not be determined based on the output voltage output LC filter of single-phase PWM inverters is harmonic specification alone an additional criterion presented. At first, the analytical expressions for based on the minimum reactive power of the LC the total harmonics of the inductor current and ca- filter is used to s p d y these parameters. The de- pacitor voltage of the LC filter are derived. As the tailed design procedure of the LC filter is outlined. unique values of the parameters of the LC filter can Experimental results are included to verify the de- not be specified based on the total harmonic of the rived expressions. capacitor voltage alone an additional criterion based on the minimum reactive power of the LC filter is used to specify these parameters. Experimental r