AN58069 - Implementing an 8-Bit Parallel MPEG2-TS Interface Using Slave FIFO Mode in FX2LP.pdfVIP

AN58069 Implementing an 8-Bit Parallel MPEG2-TS Interface using Slave FIFO Mode in FX2LP Author: Praveen Kumar Murugesan Associated Project: Yes Associated Part Family : CY7C68013/14/15/16 Software Version: None Related Application Notes: None If you have a question, or need help with this application note, contact nikl@. This application note explains how to implement an 8-bit parallel MPEG2-TS interface using the Slave FIFO mode. The example code uses EZ-USB FX2LP™ (CY7C68013/14/15/16) at the receiver end and a data generator as the source for the data stream. The hardware connections and example code are included with this application note. In addition, this application note describes a design example that uses this interface. Introduction Figure 1. MPEG2-TS Packet The EZ-USB FX2LP is an excellent solution if you want to a Header Optional variable length Payload high-performance high-speed USB to a design. In (4 bytes) adaptation field (184 bytes) applications similar to a TV dongle, an MPEG2-TS to USB Bridge is critical. The EZ-USB FX2LP not only takes care of glueless logic, but also makes it easier for the designer to F