《《ES 2184 Cleaning and Flushing of Hydraulic Systems》.pdfVIP

Specification No. ES 2184 CONTENTS Paragraph Page 1.0 SCOPE 1 2.0 APPLICABLE DOCUMENTS 1 3.0 PREPARTION FOR FLUSHING 1 4.0 PROCEDURE 2 5.0 ACCEPTANCE CRITERIA 3 6.0 POST FLUSH PROCEDURE 3 Appendix A CLEANING OF OIL TANK INTERNAL SURFACES 6 AND TANK VENT PIPING Appendix B PICKLING AND PASSIVATION OF PIPEWORK AND EQUIPMENT 7 TABLE Table Page 1 Flow Rates for Reynolds Number (Nr) = 4000 5 FIGURE Figure Page 1 Typical Flushing System 4 ii Specification No. ES 2184 1.0 SCOPE - This specification covers the preparation and acceptance criteria for the cleaning and flushing of components and piping used in lube, seal, and hydraulic systems on Solar packages. Proper cleaning and flushing will remove the contamination built into components and