《《IR2130》.pdf

Data Sheet No. PD-6.019F 3-PHASE BRIDGE DRIVER Features Product Summary Floating channel designed for bootstrap operation Fully operational to +600V VOFFSET 600V max. Tolerant to negative transient voltage dV/dt immune IO+/- 200 mA / 420 mA Gate drive supply range from 10 to 20V Undervoltage lockout for all channels VOUT 10 - 20V Over-current shutdown turns off all six drivers Independent half-bridge drivers Matched propagation delay for all channels ton/off (typ.) 675 & 425 ns Outputs out of phase with inputs Deadtime (typ.) 2.5 µs Description The IR2130 is a high voltage, high speed power Packages MOSFET and IGBT driver with three independent high and low side referenced output channels. Proprietary HVIC technology enables ruggedized monolithic con- struction. Logic inputs are compatible with 5V CMOS or LSTTL outputs. A ground-referenced operational amplifier provides analog feedback of bridge current via an external current sense resistor. A current trip function which terminates all six outputs is also de- rived from this resistor. An open drain FAULT signal indicates if an over-current or undervoltage shutdown has occurred. The output drivers feature a high pulse current buffer stage designed for minimum driver cross-conduction. Propagation delays are matched to simplify use at high frequencies. The floating chan- nels can be used to drive N-channel power MOSF