《adafruit-arduino-lesson-14-servo-motors》.pdf

Arduino Lesson 14. Servo Motors Created by Simon Monk Last updated on 2013-06-11 08:16:06 PM ED Guide Contents Guide Contents 2 Overview 3 Parts 4 Part 4 Qty 4 he Breadboard Layout for Sweep 6 If the Servo Misbehaves 7 Arduino Code for Sweep 8 he Breadboard Layout for Knob 10 Arduino Code for Knob 11 Servo Motors 12 Inside a Servo 13 Other hings to Do 14 © Adafruit Industries http:// learn.adafruit .com/adafruit-arduino-lesson-14-servo-motors Page 2 of 14 Overview In this lesson, you will learn how to control a servo motor using an A rduino. Firstly, you will get the servo to sweep back and forth automatically and then you will add a pot to control the position of the servo. © Adafruit Industries http:// learn.adafruit .com/adafruit-arduino-lesson-14-servo-motors Page 3 of 14 Parts To build the projects described in this lesson, you will need the following parts . Part Qty