《IPG Green laser 2016-12-27》.pdfVIP

In the IPGs Green laser with wavelength of 532nm, there are three different types -pulsed green laser, GLPM and CW laser. the details are demonstrated followingly. IPGs green pulsed fiber lasers - Pulsed Green and GLPM provide a high peak power with scalable average output power up to 15 W, pulse duration of 1 ns and frequency of 10 to 900 kHz. Featuring M2 of 1.2, the novel fiber laser is much more efficient and compact than conventional lasers now on the market, and is ideal for applications in the solar/photovoltaic arena, resistor trimming and marking of transparent materials. Higher output powers are planned. IPGs CW green fiber laser is a single frequency and low noise laser that features output power 15 W, M2 of 1.1, and a linewidth of 1 MHz at 532 nm. In a compact, rugged design, the CW green fiber laser is well suited for Ti-sapphire pumping, entertainment and various other applications where the highest coherency and stability of visible laser emission are required. Statement: All involved are collected from iinternet, and the corresponding copyright belongs to the original author(s) or organization(s). Any problem, please connect me. Thanks. Continuous Wave Green Fiber Laser IPG Photonics extends its family of high-power, low-noise, single-mode, single-frequency CW green fiber lasers by adding new models with unprecedented output power up to 100 W. GLR series lasers, based on IPG’s pioneering fiber laser technology, feature compact, air-cooled 19” 3U or 4U rack-mounted pump lasers with extremely small and lightweight heads which do not require water- or air-cooling. Applications: • Welding Cutting of Highly Reflective Metals