《MAX1916(白光LED驱动)》.pdf

19-2067; Rev 0; 7/01 Low-Dropout, Constant-Current Triple White LED Bias Supply General Description Features M The MAX1916 low-dropout bias supply for white LEDs Low 200mV Dropout at 9mA A X is a high-performance alternative to the simple ballast resistors used in conventional white LED designs. The Up to 60mA/LED Bias Current MAX1916 uses a single resistor to set the bias current 0.3% LED Current Matching 1 for three LEDs, which are matched to 0.3%. The 9 1 MAX1916 consumes only 40µA of supply current when Simple LED Brightness Control 6 enabled and 0.05µA when disabled. Low 40µA Supply Current The MAX1916’s advantages over ballast resistors Low 0.05µA Shutdown Current include significantly better LED-to-LED bias matching, much lower bias variation with supply voltage variation, 2.5V to 5.5V Supply Voltage Range significantly lower dropout voltage, and in some appli- Thermal Shutdown Protection cations, significantly improved efficiency. The MAX1916 requires a 200mV dropout at a 9mA load on each out- Tiny