《USB_TO_RS232英文说明》.docVIP

Welcome to use our product Installation Guide Step 1: Insert CD Driver of this product to the CD-ROM Step 2: Connect the device to a spare USB port on your PC , and find new hardware wizard, please refer to the following chart: Step 3: Select “No,not this time”,click “Next” to continue. Step 4: Select “Install from a list or specific location(Advanced)”,click “Next” to continue. Step 5: Select “Search removable media(floppy,CD-ROD…)”, click “Next” to continue. Step 6: Auto search for the corresponding driver in the CD. Setp 7: You will find two types of hardware wizard, one is for USB 2.0