08 receiving and unloading of material英文资料.docVIP

Shipping department shall give the Product Consultant / Builder sufficient advance notice for all site deliveries to ensure there is a plan for unloading, so that Product Consultant / Builder can mobilize suitable crane and manpower for unloading of material. A delivery note is always enclosed with the supplied materials to clarify name of project, location, building number, type of materials, quantity, date of delivery, etc. Upon arrival of materials at the storage yard, the Builder’s material controller will match delivery notes and shall verify the consignment. The material controller, then, reports to the site supervisor the received material list and quality condition. There should be an Appointed Person by Builder who will be having overall control of all lifting operations on site and the Appointed Person must ensure that everyone in the crane team has studied this manual and is aware of the correct procedures to adopt in the cases not covered by this manual. PLANNING THE LIFT Planning the lifting operation is essential to ensure that the lift is carried out safely and efficiently. The following points must always be considered: Where the load is to be picked up from Where the load is to be placed What areas are to be passed over Proximity of the other contractors workers Any obstructions in the way How the load is to be slung How the slings are to be removed How the crane driver will be directed The weight of the load The weather THE LIFT Before Lifting Only authorized slingers / signallers should sling the loads. After slinging, but before lifting, the following must be considered: Are the slings undamaged and properly attached to the load? Is the crane hoist rope vertical? Is the load free to be lifted, i.e. not fixed to anything else? Is the safety latch on the lifting hook closed? Are all personnel clear of the load? Is the landing site prepared to take the load? Are the legs of a multi-legged sling equally loaded? Is there a slinger / signaller in po