《Design of an ultracompact MMI wavelength demultiplexer in slot waveguide structures》.pdf

Design of an ultracompact MMI wavelength demultiplexer in slot waveguide structures * Jinbiao Xiao , Xu Liu, and Xiaohan Sun Lab of Photonics and Optical Communications, Electronic Engineering Department, Southeast University, Nanjing 210096, China *corresponding author, email address:jbxiao@seu.edu.cn Abstract: Based on a multimode interference (MMI) coupler in slot waveguide structures, an ultracompact wavelength demultiplexer operating at 1.30 and 1.55μm wavelengths is proposed and designed by using a full- vector mapped Galerkin mode solver and a modified three-dimensional full- vector beam propagation method. The tapered waveguide structures are applied to connect the input/output channels and the MMI section for reducing excess loss. The modal characteristics of the slot waveguides are analyzed and the evolution of the injected field in whole device are demonstrated. The results show that a MMI section of 119.8μm in length, which is only 27.5% length of that of the MMI coupler by using conventional rib waveguides, is achieved with the contrasts of 26.03 and 28.14dB at wavelengths 1.30 and 1.55μm, respectively, and the insertion losses are below 0.2dB at both wavelengths. ©2007 Optical Society of America OCIS codes: (130.3120) Integrated optics devices; (230.7370) Waveguides; (130.2790) Guided waves References and links 1. C. A. Brackett, “Dense wavelength division multiplexing netw