《3D holographicprinter Fast printing approac》.pdf

3D holographic printer: Fast printing approach Alexander V. Morozov, 1,∗ Andrey N. Putilin, 2 Sergey S. Kopenkin, 3 Yuriy P. Borodin, 3 Vladislav V. Druzhin, 1,4 Sergey E. Dubynin 1 and German B. Dubinin 1 1 SAIT Russia Lab, Samsung RD Institute Rus, 2013 Office 1501, bldg.1, 12, Dvintsev str., Moscow 127018, Russia 2 P.N. Lebedev Physical Institute of the Russian Academy of Sciences, 53, Leninskiy Prospect, 119991, Moscow, Russia 3 Moscow State Technical University of RadioTechnics, Electronics and Automatics, 78, Vernadskogo ave., 119454, Moscow, Russia 4 Moscow State Technical University n.a. Bauman, bldg.1, 5, 2-ya Baumanskay str., Moscow 105005, Russia ∗alexander.morozov@ Abstract: This article describes the general operation principles of devices for synthesized holographic images such as holographic printers. Special emphasis is placed on the printing speed. In addition, various methods to increase the printing process are described and compared. © 2014 Optical Society of America OCIS codes: (210.2860) Holographic and volume memories; (230.3120) Integrated optics de- vices; (230.7370) Waveguides. References and links 1. S.A. Benton, V.M. Bove Jr., Holographic Imaging (Wiley-Interscience, 2008), 1st ed. 2. H. Kogelnik, “Couple wave theory for thick hologram gratings,” Bell System Technical Journal 48, 2909–2949 (1969). 3. Michael Klug, Mark Holzbach, Alejandro