《EasyIO Adv 01 -Modbus Master and Slave》.pdf

EasyIO 30P Modbus Master and Slave Configurations EasyIO 30P Modbus Master and Slave EasyIO 30P Modbus Master and Slave Configurations Document Change Log 28th October 20 Document created. 30th March 2012 Hardware configuration added. EasyIO 30P Modbus Master and Slave Configurations Contents Introduction 4 Hardware configurations 5 EasyioModbusSlave 6 ModbusSlaveAsyncNetwork 6 ModbusSlaveDevice 10 ModbusPointCoil 12 ModbusPointDiscrete 13 ModbusPointHoldingFloat 14 ModbusPointHoldingLong 15 ModbusPointHoldingWord 16 ModbusPointInputFloat 17 ModbusPointInputLong 18 ModbusPointInputWord 20 Configuring the Modbus Slave Network 21 EasyIO 30P Modbus Master and Slave Configurations Introduction Every EasyIO 30P comes with a feature called Modbus Master. The EasyIO 30P can be a modbus master and slave devices can be connected to the RS 485 port on board. This feature only applicable for Modbus Async devices. BACnet MS/TP devices is not supported for with this feature. This feature enable users to hooked up directly to a Variable Speed Drive (VSD) , Digital Power Meters (DPM) and other modbus Async devices. However there is a limitation to max devices per Ea