《POM-9021-物性表》.pdfVIP

HOSTAFORM® C 9021 | POM | Unfilled Description Chemical abbreviation according to ISO 1043-1: POM Molding compound ISO 9988- POM-K, M-GNR, 03-002 POM copolymer Standard-Injection molding type with high rigidity, hardness and toughness; good chemical resistance to solvents, fuel and strong alkalis as well as good hydrolysis resistance; high resistance to thermal and oxidative degradation. Fulfils EG-directive 2002/72/EU as well as the recommendation XXXIII for consumer goods of the BgVV, FDA compliant according to 21 CFR 177.2470 UL-registration for all colours and a thickness more than 1.5 mm as UL 94 HB, temperature index UL 746 B electrical 110 °C, mechanical 90 °C. Burning rate ISO 3795 and FMVSS 302 75 mm/min for a thickness more than 1 mm. Ranges of applications: automotive engineering, precision engineering, electric and electronical industry, domestic appliances. FDA = Food and Drug Administration (USA) BgVV = Bundesinstitut f•r gesundheitlichen Verbraucherschutz und Veterin rmedizin FMVSS = Federal Motor Vehicle Safety Standard (USA) UL = Underwriters Laboratories (USA) Physical properties Value Unit Test Standard Density 1410 kg/m³ ISO 1183 Melt volume rate (MVR) 8 cm³/10min ISO 1133 MVR test temperature 190 °C ISO 1133 MVR test load 2.16 kg ISO 1133 Mold shrinkage - parallel 2 % ISO 294-4 Mold shrinkage - normal 1.8 % ISO 294-4 Water absorption