《多电池组储能系统双向DC_DC变换器的研制》.pdfVIP

第 39 卷 第 3 期 电力系统保护与控制 Vol.39 No.3 2011 年2 月 1 日 Power System Protection and Control Feb.1, 2011 多电池组储能系统双向DC-DC变换器的研制 1 2 李 立 ，刘 刚 （1. 湖南工程学院电气信息学院，湖南 湘潭 411101； 2.许继集团，河南 许昌 461000） 摘要：介绍了多电池组储能系统中常用几种电池充放电变换器的主电路拓扑和工作原理，并对与电池连接的双向DC-DC变换 器的控制策略进行了研究。研制了一台由3路双向 DC-DC 变换器和1路双向PWM变流器构成的电池充放电系统，功率为120 kW， 能满足3路电池的独立充放电要求。在锂电池储能系统中的实验结果表明，研制的双向DC-DC变换器，具有电池充电、电池 放电、孤岛运行和电池互充放电等多种功能，而且充电电流纹波电流小于 0.5%，波形平滑，可适用于多组，宽范围电压的 电池组的充放电要求。 关键词：多电池组储能系统；双向DC-DC变换器；锂电池 Development of bi-directional DC-DC converter in multiple battery energy storage system 1 2 LI Li , LIU Gang （1. College of Electrical Information Engineering, Hunan Institute of Engineering, Xiangtan 411101, China; 2. XJ Group Corporation，Xuchang 461000 ，China ） Abstract ：It introduces the main circuit topology and working principle of the battery charging and discharging converter in multiple battery energy storage system ，and studies the control strategy for bi-directional DC-DC converters connecting with the battery. A battery charge and discharge system composed of three groups of bi-directional DC-DC converters and one bi-directional PWM converter is developed，whose power is 120 kW ，which can meet the need for independent charge and discharge of three groups of batteries. Experimental results in the lithium battery energy storage system show that the bi-directional DC-DC converter has multiple functions，such as battery charging ，battery discharge ，islanding operation，battery charge and discharge with each other. The charge current ripple current is less than 0.5%