-毕业设计（论文）-基于虚拟样机的机构运动仿真分析.docVIP

2 e 题 目 基于虚拟样机的机构运动仿真分析 学生姓名 ee 学号 ee 所在学院 机械工程学院 专业班级 ee 指导教师 ee __ ____ __ 完成地点 校内 ___ 2009年 6 月 10 日  基于虚拟样机的机构运动仿真分析 （ee） 指导教师： [摘要] 牛头刨床作为一种主要用于刨削中小型工件上的平面、成型面和沟槽的机床，其传统的开发模式存在开发周期长、成本过高、过程繁杂、性能测试困难等问题。本文针对现有牛头刨床设计方法和验证手段存在的不足，把ADAMS虚拟样机技术软件引入到牛头刨床的研究中，展示了一种简洁、高效的机械设计分析手段，为牛头刨床的设计开发提供了一个新的平台。同时，采用的虚拟样机技术和思想以及得到的一些仿真结果对同类机床的设计具有一定借鉴意义。 [关键词] Analysis on Mechanism Motion Simulation Based on the Virtual Prototype ee （） Abstract：With foreign manufacturers entering domestic market, the competition becomeincreasingly in machine manufacturing industry, the core of competition amongenterprises is constantly upgrading of the new products. The globalization is growingin the world; meanwhile, science and information technology have been developedand spread rapidly, all this has greatly accelerated the development and revolution oftraditional manufacturing machinery. In this background, virtual prototypingtechnology has been widely applied to research and product of production in theenterprise. Shaper, as a kind of is mainly used for cutting plane, formed surface and grooves on the small and medium-sized work pieces of machine tools, the traditional development model has long development cycle, high cost, process, difficult problems, such as multifarious, performance testing. This article in view of the existing shaper design method and the verification method of the software ADAMS virtual prototype technology is introduced into the shaping machine study, presents a simple and efficient means of mechanical design and analysis, for shaper design development provides a new platform. At the same time, using virtual prototype technology and ideas, and get some simulation resul