eetop.cn_Intel公司pci-e布线规范.pdf

PCI Express* Board Design Guidelines DRAFT Intel Corporation June 2003 DRAFT *Other names and brands may be claimed as the property of others. PCI Express* Board Design Guidelines, DRAFT THIS DOCUMENT IS PROVIDED “AS IS” WITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NONINFRINGEMENT, FITNESS FOR ANY PARTICULAR PURPOSE, OR ANY WARRANTY OTHERWISE ARISING OUT OF ANY PROPOSAL, SPECIFICATION OR SAMPLE. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted herein. Intel disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this specification. Intel, the Intel logo, and Pentium are trademarks or registered trademarks of Intel Corporation or its subsidiaries in the Untied States and other countries. § Other names and brands may be claimed as the property of others. Copyright  2003, Intel Corporation. All rights reserved. This document is accessible on the Web at: The PCI Express Base Specification and PCI Express Electromechanical Specification can be found on PCI-SIG web site: ii *Other names and brands may be claimed as the property of others. PCI Express* Board Design Guide, DRAFT Contents 1. Physical Interconnect Layout Design 5 1.1 Introduction 5 1.2 Topology and Interconnect Overview 5 1.2.1 Card Interoperability 7 1.2.2 Bowtie Topology Considerations 7 Lane Polarity Inv