L6234三相电机驱动.pdfVIP

AN1088 ® APPLICATION NOTE L6234 THREE PHASE MOTOR DRIVER by Domenico Arrigo INTRODUCTION The L6234 is a DMOSs triple half-bridge driver with input supply voltage up 52V and output current of 5A. It can be used in a very wide range of applications. It has been realized in Multipower BCD60II technology which allows the combination of isolated DMOS transistors with CMOS and Bipolar circuits on the same chip. It is available in Power DIP 20 (16+2+2) and in Power SO 20 packages. All the inputs are TTL/CMOS compatible and each half bridge can be driven by its own dedicated input and enable. The DMOS structure has an intrinsic free wheeling body diode so the use of external diodes, which are necessary in the bipolar configuration, can be avoided. The DMOS structure allows a very low quiescent current of 6.5 mA typ. at Vs=42V , irrespective of the load. DEVICE DESCRIPTION The device is composed of three channels. Each channel is composed of a half bridge with two power DMOS switches ( typ. Rdson of 300mW @ 25°C) and intrinsic free wheeling diodes. Each channel in- cludes two TTL/CMOS and uP compatible comparators, and a logic block to interface the inputs with the drivers. The device includes an internal bandgap reference of 1.22V, a 10V voltage reference to supply the internal circuitry of the device, a central charge pump to drive the upper DMOS switch, thermal shut- down protection and an internal hysteretic function which turns off the device when the junction tempera- ture exc