机械毕业设计921基于虚焦点的圆锥体端面尺寸数显量具的研制.docVIP

论文题目： 学生姓名： 所在院系： 机电学院 所学专业： 机械设计制造及其自动化 导师姓名： 完成时间：摘 要 关键词Development of Digital Display Device for Measuring the End Size for the Cone Based on Virtual Intersection Abstract Because the cone has structural specificity, which causes its end face diameter not easy to be measured. Cone and detection methods, the most common is the use of cone sets of regulations, this detection method is generally used to judge whether the workpiece size within the limits of the provisions to determine whether the workpiece qualified, but you can not measure the actual size parts cone. Particularly when