电磁干扰测试接收机___振荡器和检波器的毕业设计.docVIP

题目： 电磁干扰测试接收机-振荡器和检波 器的设计 电磁干扰接收机——振荡器和检波器的设计 摘　　要 电磁干扰（或电磁干扰，也被称为射频干扰或射频干扰当在高频或射频干扰）是由于电磁感应或电磁射线影响电路的外部源。电磁干扰接收机（EMI）是用于测量电磁输入频率量的专门仪器。本课题是EMI接收机中的一个子课题。本文的课题即电磁干扰接收振荡器和检波器的设计是保证电磁干扰接收机准确稳定工作的重要保证，如果按照模电的知识来设计本课题将会十分的繁琐而且要计算很多参数，导致准确的不够高，所以对振荡器就使用芯片来实现，本文根据EMI接收机的整体设计要求采用AT89c51、AD7008相结合利用DDS（数字频率直接合成）原理来实现电磁干扰接收机的一本振。二本振和三本振利用摩托罗拉公司的E1648等芯片来实现该系统中的振荡器电路原理图。检波电路环节要求实现均值检波峰值检波以及准峰值检波，所以在典型的原理图上将参数多次修改反复的在Multisim仿真软件上进行仿真，对比前后输入输出波形分析对参数进行优化选择，最终得到比较理想的元器件参数，其结果符合本课题的设计要求。 关键词：电磁干扰；振荡器；检波器；仿真 EMI RECEIVER-- Design of oscillator and detection circuit ABSTRACT 　　Electromagnetic interference or electromagnetic interference, also called radio frequency interference and radio frequency interference when in the high frequency or radio frequency interference is due to the electromagnetic induction and electromagnetic radiation affect the external source circuit. Electromagnetic interference EMI receiver is used to measure electromagnetic frequency of input quantity of specialized instruments. This topic is a corpus of EMI receiver. This paper topic of electromagnetic interference and geophone receiving oscillator design is to guarantee the accuracy of the emi receiver the important assurance of stable work, if the electricity knowledge to design this topic will be quite cumbersome and to calculate a lot of parameters, leading to a high accurate enough, so is used for oscillator chip to implement,in this paper, according to the requirements of the EMI receiver overall design combined with AT89c51 and AD7008 use DDS direct digital frequency synthesis principle to realize the electromagnetic interference receiver a vibration. 2 and 3 of this vibration using MOTOROLA E1648 chips to implement the oscillator circuit principle diagram of the system. Detection circuit link for average detection peak detection and quasi-peak detector, so in a typical schematic diagram of the general parameter modify many times repeatedly in Multisim simulation software simulation, input a