齿根强度计算对比 IS0 AGMA.pdfVIP

Comparative Analysis of Tooth-Root Strength Using ISO Andrzej Kawalec and AGMA Standards in Spur and e-mail: ak@prz.edu.pl Jerzy Wiktor Helical Gears With FEM-based Rzeszów University of Technology, Verification Department of Mechanical and Aerospace Engineering, ul. W. Pola 2, Current trends in engineering globalization require researchers to revisit various normal- Rzeszów, PL-35-959, ized standards that determine “best practices” in industries. This paper presents com- Poland parative analysis of tooth-root strength evaluation methods used within ISO and AGMA standards and verifying them with developed models and simulations using the finite element method (FEM). The presented analysis is conducted for (1) wide range of spur Dariusz Ceglarek and helical gears manufactured using racks or gear tools; and for (2) various combina- Department of Industrial and Systems tions of key geometrical (gear design), manufacturing (racks and gear tools), and per- Engineering, formance (load location) parameters. FEM of tooth-root strength is performed for each The University of Wisconsin-Madison, modeled gear. FEM results are compared with stresses calculated based on the ISO and Madison, WI AGMA standards. The comparative analysis for various combinations of design, manu- e-mail: