原创力文档- 1、本文档共12页，可阅读全部内容。
- 2、原创力文档（book118）网站文档一经付费（服务费），不意味着购买了该文档的版权，仅供个人/单位学习、研究之用，不得用于商业用途，未经授权，严禁复制、发行、汇编、翻译或者网络传播等，侵权必究。
- 3、本站所有内容均由合作方或网友上传，本站不对文档的完整性、权威性及其观点立场正确性做任何保证或承诺！文档内容仅供研究参考，付费前请自行鉴别。如您付费，意味着您自己接受本站规则且自行承担风险，本站不退款、不进行额外附加服务；查看《如何避免下载的几个坑》。如果您已付费下载过本站文档，您可以点击 这里二次下载。
- 4、如文档侵犯商业秘密、侵犯著作权、侵犯人身权等，请点击“版权申诉”（推荐），也可以打举报电话：400-050-0827(电话支持时间：9:00-18:30)。
查看更多
PSTC-107.pdf
Harmonized International Standard Call Letters PSTC 107
Date of Issuance 10/00
Revised 10/03
Revised 05/07
Shear Adhesion of
Pressure Sensitive Tape
1. SCOPE
1.1 These procedures help determine the ability of a pressure sensitive tape to remain adhered
under a constant load applied parallel to the surface of the tape and substrate. Shear adhesion
(shear resistance) is the ability of a tape to resist static forces applied in the same plane as the
backing.
1.1.1 Procedure A measures the shear adhesion when applied to a vertical standard steel panel.
1.1.2 Procedure B measures the shear adhesion when applied to a vertical panel covered with
NIST (National Institute of Standards and Technology, USA) SRM 1810A standard fiberboard.
1.1.3 Procedure C measures the shear adhesion when applied to vertical panel covered with a
fiberboard agreed upon by the buyer and seller.
1.1.4 Procedure D measures the shear adhesion of reinforced filament tape when applied to a
horizontal standard steel panel.
1.1.5 Procedure E measures the shear adhesion of a filament-reinforced tape when applied to
a horizontal panel covered with NIST SRM 1810A standard fiberboard.
1.1.6 Procedure F measures shear adhesion of a filament-reinforced tape when applied to a
horizontal panel covered with a fiberboard agreed upon by the buyer and seller.
1.1.7 Procedure G is the same as Test Method A except the test is conducted at an elevated
temperature and a 10-minute dwell time.
1.2 These procedures
文档评论（0）