Facile fabrication of biomimetic superhydrophobic surface with anti-frosting on stainless steel substrate》.pdfVIP

Applied Surface Science 355 (2015) 1238–1244 Contents lists available at ScienceDirect Applied Surface Science j o u rn al h o m e p a g e : w w w. elsev /locate/aps usc Facile fabrication of biomimetic superhydrophobic surface with anti-frosting on stainless steel substrate Yan Liu a , Yuan Bai a , Jingfu Jin b , Limei Tian a,∗ , Zhiwu Han a , Luquan Ren a a Key Laboratory of Bionic Engineering(Ministry of Education), Jilin University, Changchun 130022, PR China b College of Biological and Agricultural Engineering, Jilin University, Changchun 130022, PR China a r t i c l e i n f o a b s t r a c t Article history: Inspired by typical plant surfaces with super-hydrophobic character such as lotus leaves and rose petals, Received 25 April 2015 a superhydrophobic surface was achieved successfully by a chemical immersion process. Here, 304 SS Received in revised form 28 June 2015 (stainless steel) was used as substrates and a micro-nano hierarchical structure was obtained by chemical Accepted 4 August 2015 etching with a mixed solution containing ferric chloride. The results showed that the water contact Available online 6 August 2015 angle (WAC) decreased obviously due to surface morphology changing after chemical etching process. However, we obtained a superhydrophobic surface with a WAC of 158.3 ± 2.8◦ after modification by DTS Keywords: (CH3 (CH ) Si(OCH ) ). Furthermo