Investigation on influence of WC–Ni addition on rolling contact fatigue behavior of plasma sprayed Ni-based alloy coating》.pdfVIP

Tribology International 90 (2015) 509 –518 Contents lists available at ScienceDirect Tribology International journal homepage: /locate/triboint Investigation on influence of WC–Ni addition on rolling contact fatigue behavior of plasma sprayed Ni-based alloy coating Zhi-qiang Zhang a, Hai-dou Wang b,n, Bin-Shi Xu b, Guo-sheng Zhang c a School of Materials Science and Engineering, Tianjin University, Tianjin 300072, China b National Key Lab for Remanufacturing, Academy of Armored Forces Engineering, Beijing 100072, China c Institute of Remanufacture and Processing Material, Tianjin Research Institute of Construction Machinery, Tianjin 300409, China a r t i c l e i n f o a b s t r a c t Article history: this paper investigated on influence of WC–Ni addition on rolling contact fatigue (RCF) behavior of Received 30 January 2015 NiCrBSi coating. The results showed that WC–Ni addition significantly influenced on failure mode of Received in revised form NiCrBSi coating especially under low stress, whereas both coatings failed in identical mode under 9 May 2015 relatively high stress. WC–Ni addition also had a specific influence on RCF lives. RCF Lives of NiCrBSi/ Accepted 18 May 2015 WC–Ni coating were longer than NiCrBSi under low stress, but they were almost same under relatively Available online 23 May 2015 high stress. RCF life distribution of NiCrBSi/WC–Ni coating was more conc