Real-time detection of styrene using SAW sensors based on hexafluoroisopropanol group functionalized hydrogen-bond acidic polymers》.pdfVIP

Sensors and Actuators B 206 (2015) 252–257 Contents lists available at ScienceDirect Sensors and Actuators B: Chemical j o u rn al h omepage: w w w. elsev /locate/snb Real-time detection of styrene using SAW sensors based on hexafluoroisopropanol group functionalized hydrogen-bond acidic polymers Yang Wang a , Xiaosong Du a,∗ , Yin Long a , Xianzhong Tang a , Zhi Chen a,b , Yadong Jiang a,∗ a State Key Laboratory of Electronic Thin Films and Integrated Devices, University of Electronic Science and Technology of China (UESTC), Chengdu 610054, China b Department of Electrical and Computer Engineering, Center for Nanoscale Science and Engineering, University of Kentucky, Lexington, KY 40506, United States a r t i c l e i n f o a b s t r a c t Article history: Hydrogen-bond acidic (HBA) polymers are well-established adsorbents for organophosphorus com- Received 5 July 2014 pounds and nitroaromatic explosives detection. In this paper, we report two HBA polymers for detection Received in revised form of styrene vapors based on 434-MHz surface acoustic wave (SAW) chemical sensors. These polymers, 17 September 2014 dubbed PLF and LSFA, are pendent hexafluoroisopropanol (HFIP)-group modified polysiloxanes, which Accepted 18 September 2014 were synthesized by one-step hydrosilylation reaction. Real-time response studies of these two sen- Available online 26 September 2014 sors showed that they are highly sensitive to styrene