新劲水性漆颜色培训课程(I)素色.pptVIP

为什么颜色会有差异 ? 同一种车会有不同的生产厂 大多使用有颜色的底漆 面漆遮盖力较弱 生产的批次不同 原厂漆来自不同的高温漆供应商 为什么颜色会有差异 ? 颜色选择错误 所使用的色母没有每天充分搅拌 所配好的颜色没有充分混合 错误的喷涂手法 …… 颜色的选择 互相配合（调色员油漆工） 色相环 关于补色 条件等色的定义 条件等色 怎样避免条件等色 主色群 颜色偏向 调色标识符 调色标识符 新劲水性漆色母配置（素色） 创造新素色配方 你可能会用到： 一个完整的调色流程 素色微调技巧（1） 尽量使用强遮盖力的色母作为主色母，遮盖力较弱的色母作为辅助色母。 加入黑和白可以调整深浅。 根据主色的相邻色选择辅助色母进行微调色相。不使用位置相对的色母。 改变彩度：同时调整黑和白色母，或者调整主色。 素色微调技巧（2） 加入黑或白会降低彩度，反之会提高彩度 湿漆干固以后一般会稍微变深，膜厚越厚越明显。 红色和黄色的遮盖力较差，可以适当选用彩色底漆。 如果这些算是小窍门…… 每日2次，每次 15 分钟开启调色机 经常维护电子秤 使用合适的调漆罐和调漆尺 经常更新电脑查色系统和色卡等颜色资料 充分搅拌你所配的颜色 (最好使用油漆振荡器) 谢谢您的参与！ Explanation of the 颜色 circle. The use of contrasting 颜色 is the secret of the 颜色 matcher.It can be very handy, but one can easily spoil the 颜色. Red and green for example are opposite. When mixing red and green approximately fifty fifty, the 颜色 is neither red nor green. This results in a brown and dirty mixture, because green absorbs red, en red absorbs green. When using too much of contrasting 颜色 there is a risk of 差异等色,in very 光线 颜色 however 差异等色 is not visible. When 微调 a 颜色 we have to give the 颜色 a place in the 颜色 circle.We just choose the 颜色 in the circle which is nearest. 颜色 which can not be placed in the outer part of the circle, like silver, anthracite etc, can be placed in the center of the circle. To explain purity you need to show it with samples, for example Q726 and Q725When you keep this two 颜色 in the spot 光线, one will see that the Q726 is brighter, deeper, more saturated than Q725, this means that Q726 cleaner than Q725. Explanation of the new numbering system which is used in Autobase Plus, Autocryl Plus and Autocryl LV .This system will be used in all new products, the older products keep the old numbers. Mix the formula. It is always advised to make a spray-out of the 颜色.Because: - Some 颜色 get darker after drying. - Metallic 颜色 are influenced by higher or lower pressure. Compare the spray-out with the car. A single 颜色 can never contain ‘差异等色’, if this 颜色 changes under different 光线 sources t