《注塑模毕业设计》.docVIP

摘要 塑料具有优良的特性,使之在现代模具行业中成为主要的加工材料，塑料模也因此成为被广泛使用的一类模具。本论文主要介绍注塑模具的设计，并结合实例——鼠标上盖的注塑模设计与计算过程，从塑料材料的选用、应用、工艺性能分析到注塑模具的基本结构设计，完成整个注塑模具的设计。 随着计算机技术的迅猛发展，工业设计领域的三维设计软件也得到了前所未有的发展,各种三维CAD/CAM软件应运而生，各具特色。本次设计即为基于Pro/E的注塑模设计，先在Pro/E中建立零件的三维实体模型，其中用到了ISDX曲面造型模块，然后利用Pro/E中的模具设计模块生成模具型腔。再根据各种注塑模设计手册来设计模具的其他零部件，最终完成整个模具的设计。最后通过将三维模型导入Auto/CAD来转换生成二维工程图。通过本论文可以熟悉整个注塑模具的设计过程。 关键词：CAD/CAE、Pro/E、注塑模、Auto/CAD。 Abstract With an excellent character, Plastics have become one of the most important industry materials in the modern mold process, and plastic mold also is the widely used category die. This paper introduces the plastic mold design and integration examples -- Computer monitors support base of molded plastic mould design and calculation process, from plastic material selection, application, performance analysis techniques to the basic structural parts design, and complete the whole the design of injection mould. With the rapid development of computer technology, the field of 3D design software used in industrial design has also had an unprecedented development, a variety of 3D CAD/CAM soft wares have coming into being differently. This time, the designing of plastic mould is based on Pro/Engineer. First establish the components in Pro/Surface (use the ISDX module) and then in Pro/mold module to get the mold surface. Then design the other parts have used in the plastic mould, and finished the entire mold designing process. Using the Auto/CAD to gain the 2D picture at last. Keywords: CAD/CAE, Pro/E, plastic mold, Auto/CAD. 目录 1 绪论 1 1.1模具的现状 1 1.2 模具的发展趋势 3 1.3 模具的种类 4 1.4 注塑模设计技术的发展阶段 5 1.4.1 手工作坊设计阶段 5 1.4.2 通用CAD系统设计阶段 5 1.4.3 专用注塑模CAD系统设计阶段 5 1.5 注塑模的重要性 6 2 零件设计与工艺性分析 7 2.1 曲面造型方法概述 7 2.2 曲面造型软件Pro/Engineer概述 7 2.2.1 基础性能 8 2.2.2 专业特殊功能 10 2.3 显示器支撑底座的造型设计 11 2.3.1 总体思路分析 11 2.3.2 设计过程 11 3 模具结构的总体设计 20 3.1 模具结构形式及注射机的初步确定 20 3.2 浇注系统设计 22 3.3成型零件的设计 23 3.4成型零件厚度计算 26 3.5合模导向结构设计 27 3.6推出机构的设计 28 3.7注塑模架的确定与辅助结构的设计 28 3.8 排气槽设计 29 3.9 温度调节系统设计 29 4 Moldflow零