XC9208替代TPS62202方案.docVIP

特瑞仕一直以市场分析能力和智力预测市场的需求，专业生产对应时代要求的电源IC。长年从事并精通数码机器必不可少的模拟设计的工程师，正在进行其他公司所没有的独特的企划，开发和设计。Texas Instruments Incorporated的TPS62202方案 XC9206,XC9207,XC9208内置三极管降压DC/DC转换器 XC9206/9207/9208系列是一组采用SOT-25封装, 内置0.4ΩP-沟道驱动三极管的降压DC/DC转换器。该系列IC外部仅使用一个电感, 一个二极管和两个陶瓷电容就可以组成高效, 稳定的电源,输出电流可达500mA。XC9206/9207的最低工作电压是1.8V,XC9208是2.0V。输出电压可以在0.9V-4.0V范围内(内部设定)以100mV间隔选择(精度±2.0%)。振荡频率可以在300kHz, 600kHz和1.2MHz中选择,因此可以选择最适合您特定应用的频率。每一个系列都有不同的工作模式:PWM 控制(XC9206系列),PWM/PFM自动切换控制(XC9207系列)和PWM, PWM/PFM自动切换控制外部可选(XC9208系列)。这个系列在整个负载范围内(从轻负载到大电流输出)都能提供快速瞬态响应, A或更小。内置U.V.L.O(欠压锁闭)功能,当输入电压降到1.6V或更低,内部的P-沟道驱动三极管会被关断。(低纹波和高效率。软启动和电流控制功能在IC内部已经最佳化。当待机时,电路被关断,消耗电流被降低到1.0 ˙ The XC9206/XC9207/XC9208 series is a group of DC/DC converters with a built-in 0.4? P-channel driver transistor, offered in a SOT-25 package. The ICs are designed to provide high efficiencies and a stable power supply with an output current of 500mA using only a coil, a diode and two ceramic capacitors connected externally. Minimum operating voltage of the XC9206/9207 is 1.8V and 2.0V for XC9208. Output voltage is internally programmable in a range from 0.9V to 4.0V in 100mV increments (accuracy: ±2.0%). Oscillation frequency is selectable from 300kHz, 600kHz and 1.2MHz so that the frequency best suited to your particular application can be selected. Each series features different operation modes: PWM control (XC9206 series), automatic PWM/PFM switching control (XC9207 series) and manual PWM/PFM switching control (XC9208 series). The series gives fast transient response, low ripple and high efficiency over the full range of load (from light load to high output current conditions). The soft start and current control functions are internally optimized. During stand-by, all circuits are shutdown to reduce current consumption to as low as 1.0ЖAor less. With the built-in U.V.L.O. (Under Voltage Lock Out) function, the internal P-channel driver transistor is forced OFF when input voltage becomes 1.4V or lower. ˙APPLICATIONS（