【优质】低压脉冲袋式除尘器设计.docVIP

武汉科技大学本科毕业设计 PAGE PAGE 12 本科毕业设计 题目： 低压脉冲袋式除尘器设计 学 院: 资源与环境工程学院 专 业: 安全工程 学 号: 200701145053 学生姓名: 王超 指导教师: 陈旺生 日 期: 二○一一年五月 摘要 袋式除尘器是目前公认的除尘效率高，对粉尘适应性强的新型除尘设备。特别是长袋低压脉冲袋式除尘器，具有清灰能力强、喷吹压力低、过滤风速大、运行能耗低、换袋方便、维修简单、自动化程度高等特点。本设计针对武钢冷轧带钢厂氧化铁皮粉尘的特性，设计出经济合理的低压脉冲袋式除尘器，用于清除冷轧带钢厂的粉尘。 本设计参考国内外的大量资料，对脉冲袋式除尘器的大多数重要部分（如脉冲阀、喷吹管、除尘器外形尺寸等）详细设计计算，确定其参数，并画出除尘器图纸，确定除尘器型号。在设计中，结合教材上所学的知识，查找相关资料和数据。根据冷轧带钢厂的实际情况，确定除尘器的处理风量和过滤风速，按照国家相关标准，经过净化后使排放气体中的粉尘浓度控制在30mg/m3以下。根据设计计算出的尺寸，大体绘制出除尘器外形图以供安装使用。 关键词： 低压脉冲袋式除尘器； 脉冲清灰； 脉冲阀 Abstract Bag filter is recognized as efficient, adaptable to the new dust removal equipment. Especially, the long low-pressure pulse bag filter bags, with cleaning ability, low pressure injection, filtered wind speed, low energy consumption, changing bags easy, simple maintenance, high degree of automation. The design of cold-rolled steel for Wuhan Iron and iron oxide scale dust features, economical and rational design of low pressure pulse bag filter for dust removal cold rolled strip steel. The design of the large amount of data on domestic and international, on the pulse bag filter most of the important parts (such as pulse valve, injection pipe, dust collector dimensions, etc.) detailed design calculations to determine the parameters and draw the dust drawings, determine filter models. In the design, combined with the knowledge learned on the materials, find relevant information and data. Cold-rolled steel in accordance with the actual situation, determine the amount of dust in the air handling and filtration velocity, according to national standards, through the purification of exhaust gas after the dust concentration in the control of 30mg / m3 or less. Calculated according to the design size, roughly drawn outline diagram for the filter installation. Keywords: Low pressure pulse bag filter; Pulse cleaning; Pulse valve 目录 TOC \o 1-3 \h \z \u HYPERLINK \l _Toc294278478 1 绪论 PAGEREF _Toc294278478 \h 5 HYPERLINK \l _Toc294278479 1.1 粉尘的危害 PAGER