Chapter 1,2 Fluid Mechanics作业.docVIP

Chapter 1 Fluid Mechanics 1-2. The reading of the vacuum gauge in an equipment is 100mmHg, try to calculate the absolute pressure and the gauge pressure, respectively. It is known that the atmospheric pressure in this area is 740mmHg. 1-3. As shown in the figure, the reservoir holds the oil with a density of 960kg/m3. The oil level is 9.6m higher than the bottom of the reservoir. The pressure above the oil level is atmospheric pressure. There is a round hole with a diameter of 760mm at the lower part of the sidewall, the center of which is 800mm higher than the bottom of the reservoir. The h