氮含量对Cr18Mn18N无磁不锈钢.docVIP

  • 10
  • 0
  • 约4.23千字
  • 约 5页
  • 2015-12-21 发布于安徽
  • 举报
氮含量对Cr18Mn18N无磁不锈钢 力学性能、磁导率和组织的影响 易邦旺 胡 燕 郎文运 杨志勇 (钢铁研究总院) 摘 要 探讨了Cr18Mn18N无磁不锈钢中氮含量对钢的力学性能、磁导性能以及组织状态的影响。研究结果表明,Cr18Mn18N钢中氮含量大于0.31 %时,组织才为全奥氏体状态,该钢氮含量的最佳区间为0.4 %~0.6 %。 关键词 氮 奥氏体 磁导率 EFFECT OF CONTENT ON MECHANICAL PROPERTIES,MAGNETIC OF Cr18Mn18N CONDUCTIVITY AND MICROSTRUCTURE YI Bangwang HU Yan LANG Wenyun YANG Zhiyong (Central Iron and Steel Research Institute) ABSTRACT The effect of N content on mechanical properties and magnetic conductivity and microstructure of Cr18Mn18N non-magnetic stainless steel is studied.The result shows that the microstructure is fully austenite when the N co

您可能关注的文档

文档评论(0)

1亿VIP精品文档

相关文档