CivilEngineering-NTS.docVIP

Civil Engineering Sr. No. Core Areas Percentage 1. Engineering Drawing 04% 2. Engineering Mechanics 05% 3. Engineering Surveying 04% 4. Engineering Material 06% 5. Fluid Mechanics 08% 6. Mechanics of Solids 05% 7. Engineering Geology 04% 8. Structural Analysis 06% 9. Transportation Planning Engineering 07% 10. Engineering Construction 05% 11. Reinforced Concrete Design 08% 12. Soil Mechanics and Foundation Design 08% 13. Environmental Engineering 05% 14. Civil Work Quantity and Cost Estimations 06% 15. Architecture and Town Planning 03% 16. Steel Structure 04% 17. Construction Planning and Management 04% 18. Irrigation and Water Resources Engineering 08% Total 100%  Civil Engineering (Detailed) Sr. No. Core Areas Percentage 1. ENGINEERING DRAWING: 1.1 Introduction________________________________________________2% Introduction to the subject and drawing equipment. Lettering and dimensioning, graphic symbols, free hand sketches and isometric views. Method of sections including assembly sections, Introduction to machine drawing. Projections: Development of surfaces. Orthographic projection, orthogonal projections of simple solids in simple position, oblique and auxiliary planes. Isometric and pictorial projections of solid figures, making of free hand sketches from solid objects and from orthographic projections. Intersection of surfaces. 1.1.2 Architectural Drawing:Introduction to Civil Engineering drawing, preparation of plan, elevation and sections for simple buildings. Introduction to Computer Graphics. General:Need and requirement of drawings for civil Engineering projects. General nature of drawings, components, symbols and nomenclature needed for specific drawings such as architectural, structural, plumbing, electrical, airconditioning, roads and earth work etc. Drawings at different stages of projects, Elements of perspective drawing. 1.2Civil Engineering Drawing___________________________________2% General descrip