WS9_Macro Basics_Verifying Pressures.pptVIP

July 30, 1999 Workshop 9Macro BasicsVerifying Pressures 9. Macro BasicsVerifying Pressures Create a macro called SFEPLOT to verify and plot the pressure applied on a specified face of a surface effect element. The macro should have arguments as follows: SFEPLOT, TYPE, FACE where TYPE is the element type number for SURF154 and FACE is the face number for which effective pressure is desired. Given: A database file containing a bolt load applied on a plate with a hole. 9. Macro BasicsVerifying Pressures 1. Enter ANSYS in the working directory specified by your instructor using “bpressu