西门子固封样本_固封式真空灭弧室技术参数.docVIP

VS12035EP 固封式真空灭弧室技术参数 Specification: VS12035EP Siemens EmbeddedPole 1. 电气参数 Electrical Data 额定电压,50 Hz Rated voltage, 50 Hz 12 kV 额定电流 Rated normal current 1600 A 额定短路开断电流,对称的 Rated short-circuit breaking current, symm. 25 kA 最大直流分量 Max. DC-component 50 % 额定短路关合电流 Rated short-circuit making current 63 kA 额定峰值耐受电流 Rated peak withstand current 63 kA 额定短时耐受电流, 4s Rated short-time withstand current, 4s 25 kA 开断容性电流符合IEC62271-100 局部放电值（1.1Um） Capacitive switching acc. to IEC 62271-100 Partial Discharge value(with a voltage of 1.1Um applied) C2级 5 Pc 2. 额定绝缘水平 Rated Insulation Level 额定工频耐受电压 Rated power-frequency withstand voltage 42 kV 额定雷电冲击耐受电压 Rated lightning impulse withstand voltage 75 kV 3. 热参数 Thermal Data 最小关合力时电阻值(新触头) Resistance at min. closing force (new cond.) ???? ?? 动端导电杆最高允许耐受温度(接线端) Max. permitted temperature at movable stem (terminal) 120 oC 4. 电气寿命 Electrical Life 额定电流情况下 With rated normal current 30,000 次 短路电流情况下 （依据GB1984-2003，E2级） With short-circuit current （According to GB1984-2003,Class E2） 274 次 5. 机械参数 Mechanical Data 触头开距 Contact stroke 8+0.5-1.5 mm 分闸过冲 Max. overtravel 2 mm 平均分闸速度(0-2mm 行程) Average opening speed (0-2 mm stroke) 1.0-1.3 m/s 平均合闸速度(2mm-触头闭合) Average closing speed (2mm- contact making) 0.7-1.1 m/s 弹跳持续时间最大值(最多允许2次弹跳) Max. bouncing duration (max. 2 bounces permitted) 2 ms 超程 Contacting travel 3+1.0-0.5 mm 额定触头压力 Rated operation pressure contact 2000-2500 N 波纹管和大气压产生的关合力* Closing force due to bellows and atmosphere* 50(10 N 额定开距下触头反力* Force required to hold contacts open at full stroke* 160(10% N 触头磨损最大值 Contact erosion limit including mechanical shortening (包括电流路径机械性缩短) of current-conducting path 3 mm 动触头质量 Mass of moving contact 0.9 kg 固封式灭弧室重量 Weight of EP 15 kg 机械寿命 Mechanical life 30,000 次 * 动触头在下面 *movable contact below VS12035EP固封式真空灭弧室外形图 VS12035EP Siemens Embedded Pole Dra