StudyofDynamicbehaviourforAMOTORspindlEBYEDDYCURRENTMONITORING.docVIP

Proceedings in MANUFACTURING SYSTEMS Proceedings in Manufacturing Systems, Vol. 5 (2010), No. Study of Dynamic behaviour for A MOTOR spindlE BY EDDY CURRENT MONITORING Claudiu BISU, Andra LITA, Dorel ANANIA, Miron ZAPCIU, Constantin ISPAS, Constantin MINCIU Abstract: Considering the severe conditions of productivity, quality, and wear a series of dynamic analysis methods are developed for determining the dynamic behavior of machines and production systems. The objective of this paper is to measure the displacements of a radial spindle of milling machine tools using Eddy Current transducers and evaluated effects by signal processing and analyzing and then determine the causes of these vibrations. To achieve analysis uses a number of elements of computing and signal processing both waveform and frequency, and location to identify any defects. To reduce the vibrations amplitudes of a circularity diagram on one or more rotations is developed with the aim of intervention on the defect to extend the lifetime of the vibration generating element. Key words: vibrations, displacements, spindle motor, eddy-current. 1. INTRODUCTION Appearance vibration is inevitable given the dynamic milling process which is subject to system-piece machine-tool in terms of productivity, quality and cost more difficult. Vibrations analysis has long been used for the detection and identification of the machine tool condition. Predictive maintenance is directed towards recognizing the earliest significant changes in machinery condition [1]. Thin-walled work piece is greatly influenced by the vibrations of the cutting process with the risk strains wall piece. The machining of thin walls generally generates milling chatter, that damage surface roughness and manufacturing tools [2, 7]. Besides appearing as an important factor for deterioration of vibration behavior of machines had to do with displacements and deformations that appear while the bearings due to the operation machine tools,