PEVERSEPLATE.docVIP

CONCRETE CUTTER OWNER’S MANUAL ATB300/55; ATB400/9; ATB450/13; ATB500/15 CONTENTS I RULES FOR SAFE OPERATION General Safety厖厖厖厖厖?-3 Diamond Blade Safety 厖厖厖厖3 Cutter Transportation Safety 厖厖厖3 Emergencies 厖厖厖厖厖厖4 Maintenance Safety厖厖厖厖厖厖厖? II OPERATION Introduction 厖厖厖厖厖厖4 Determining the Right Machine 厖厖4 Operating principle厖厖厖厖厖4 Delivery Checks厖厖厖厖厖厖厖? Installing Blade厖厖厖厖厖? Type of Cutting厖厖厖厖厖? Before Starting厖厖厖厖厖? To Start Cutting 厖厖厖厖厖5 Cutting 厖厖厖厖厖厖厖6 Belts Pulleys厖厖厖厖厖? Dry Cutting厖厖厖厖厖厖6 III MAINTENANCE Troubleshooting厖厖厖厖厖7-8 IV LUBRICATION AND SERVICE厖? V SPECIFICATION 厖厖厖厖 10 I RULES FOR SAFE OPERATION WARNING: Failure to follow instructions in this manual may lead to serious injury or even death! This equipment is to be operated by trained and qualified personnel only! This equipment is for industrial use only. The following safety guidelines should always be used when operating these Concrete Cutters: GENERAL SAFETY DO NOT operate or service this equipment before reading the entire manual. This equipment should not be operated by persons under 18 years of age. NEVER operate this equipment with out proper protective clothing, shatterproof glasses, steel-toed boots and other protective devices required by the job. NEVER operate this equipment when not feeling well due to fatigue, illness or taking medicine. NEVER operate this equipment under the influence or drugs or alcohol. NEVER use accessories or attachments, which are not recommended by our company for this equipment. Damage to the equipment and / or injury to user may result. The manufacturer does not assume responsibility for any accident due to equipment modifications. Whenever necessary, replace nameplate, operation and safety decals when they become difficult to read. ALWAYS check the machine for loosened threads or bolts before startin