Freescalepresentationtemplate-NXP.pptVIP

April 17, 2003 HP presentation template user tutorial - Rev. 1 Name of your presentation here HP presentation template tutorial - Rev. 1 Single Phase On-Line UPS DemoUsing MC9S12E128 UPS Classification Based on the topology the UPSes are classified to the three basic categories (IEC 62040-3): Passive Standby (Off-line) Line-interactive Double Conversion (On-Line) Basic UPS Topology - Off-line UPS Basic UPS Topology - Line-Interactive UPS Basic UPS Topology - On-Line UPS Single Phase On-Line UPS Demo Using MC9S12E128 Single Phase On-Line UPS Demo Using MC9S12E128 Demo Features Single Phase On-line Topology 750 VA Output Power 115/230 V Input Line Controlled by MC9S12E128 Single LED User Interface 4 Status LEDs 6 LEDs Bar Graph 2 Buttons Graphical User Interface on PC Ready for GUI Display Demo suitcase Single Phase On-Line UPS Demo Using MC9S12E128 Demo Concept Four PCBs UPS Power Stage Input Filter User Interface MC9S12E128 Control Board Demo case Single Phase On-Line UPS Demo Using MC9S12E128 Concept Schematic Single Phase On-Line UPS Demo Using MC9S12E128 MC9S12E128 Features 16-bit HCS12 CPU, 50 MHz core clock 128K bytes of Flash EEPROM, 8K bytes of RAM 3 x SCI, 1 x SPI, 1 x IIC 3 x 4-channel 16-bit timer modules (TIM) 6-channel 15-bit Pulse Modulator with Fault protection module (PMF) 6-channel 8-bit Pulse Width Modulator (PWM) 16-channel 10-bit analog-to-digital converter (ADC) 2 x 1-channel 8-bit digital-to-analog converter (DAC) Up to 16 pins available as Keypad Wake-Up inputs 2 x additional external asynchronous interrupts Up to 74 I/O port pins and 18 input only pins for 112 pin package Up to 42 I/O port pins and 18 input only pins for 80 pin package Single Phase On-Line UPS Demo Using MC9S12E128- HW Implementation Battery Charger Fly-Back Topology Converter Dedicated circuit used (TOP249) Output parameters Output voltage: 29.4 or 27.4 V (set by MCU) Output current: max. 1.8 A Current limitation: 0 – 1.8 A (set by MCU) Charge algorithm 3 state (bulk charg