《德国E+H分析仪表：电导率传感器 Condumax W CLS16.》.pdf

Technical Information Condumax H CLS16 Conductivity Sensor Fixed cable or connector versions with integrated temperature sensor Cell constant k = 0.1 cm-1 Application Measurement in pure and ultrapure water: 0 With ATEX approval for application in hazardous areas. • Monitoring ion exchangers • Reverse osmosis Your benefits • Distillation • Electro-deionising • High measuring accuracy as cell constant is individually • WFI (Water for Injection) in the pharmaceutical industry measured -1 • Installation in pipes or flow chambers The cell constant k of the sensor is 0.1 cm . The measuring • Hygienic process connections range reaches from 0.04 to 500 µS/cm. • Plug-in head (IP 68) / fixed cable(IP 67) Sensors with a Pt 100 or Pt 1000 temperature sensor are used • Easy to clean due to electro-polished measuring surfaces with transmitters with automatic temperature compensation: • Can be sterilised up to max. 150 °C • Mycom S CLM153 • Stainless steel 1.4435 (AISI 316L), meets the highest • Liquisys M CLM223/253 demands of the pharmaceutical industry • Mypro CLM431 • Quality certificate stating the individual cell constant • 3-A certificate For measurement of resistivity, MΩ · cm measuring ranges are available in the menues of these transmitt