五方井矿设计说明书——毕业设计.doc

采矿工程毕业设计论文 姓名：苗耀龙 学号：0401010221 专业：采矿工程 院系：能源与安全工程学院 湖 南 科 技 大 学 安源实业有限公司五方井矿井初步设计 摘要: 设计根据五方井矿的煤层赋存情况、地质构造、水文特征、以及地面交通等条件对矿井的开拓方案进行了经济技术比较，最后确定了以平硐、立井的综合开拓方式。设计本着“安全第一，效益第二”的原则对矿井的开拓、经营以及管理各方面进行了分析和论证。根据煤层的厚度和实际赋存情况井田内地质构造比较简单，属低瓦斯矿井，本井田主要可采煤层有三层，煤层倾角平均18o，属于缓倾斜煤层，设计采用单一走向长壁采煤法。为响应用我国当前采煤方法的发展方向,本矿井设计采用综合机械化沿空留巷采煤工艺,对于下部厚煤层采用综采放顶煤技术，矿井初步设计生产能力为120万t/a，服务年限为89年.对于安全方面，本矿井为低瓦斯矿井，但为确保安全特设置瓦斯监控系统。 关键词: 平硐 立井 综合开拓 综采 综采放顶煤 单一走向长壁采煤法 沿空留巷 Preliminary design of the five fang Colliery Abstract: According to the design of the five parties mining coal storage wells, geological structure, hydrological features, as well as ground transportation, and other conditions on the mines development programme for the economic and technical comparison, the final determination to Adit, the shaft develop a comprehensive manner. Design of safety first, the second-effectiveness of the principle of mine development, operation and management of all aspects of the analysis and feasibility studies. According to the seam thickness and the actual occurrence in the mine field geological structure is relatively simple, a low-gas coal mine, the mine field of the major coal mining can have three levels, the average coal seam dip 18 , gently inclined coal, designed with a single to long wall mining . In response to Chinas current mining method direction for the development of an integrated design of the mine along the goaf mechanized coal mining technology, the lower part of a thick coal seam Fully-caving, mine preliminary design production capacity of 1.2 million t / a, Length of service for 89. For safety, the mine for the low-gas coal mine, but to ensure the safety of gas set up special monitoring system Key words: adit cut mining; shaft development;the method of combined development; compr ehensive mechanized coal mining;technology of fully mechanized mining with top-coal drawing in thick coal seams: single longwall mining on the strike;maitaining entries along gob edges; 目 录 第一章 井田概