SECTION 08422923 - AUTOMATIC ENTRANCES.docVIP

Stanley Access Technologies, LLC 65 Scott Swamp Road Farmington, CT 06032 Phone: (800) 722-2377 Fax: (860) 679-6426 This MANU-SPEC utilizes the Construction Specifications Institute (CSI) Project Resource Manual (PRM), including MasterFormatTM, SectionFormatTM and PageFormatTM. A MANU-SPEC is a manufacturer-specific proprietary product specification using the proprietary method of specifying applicable to project specifications and master guide specifications. Optional text is indicated by brackets []; delete optional text in final copy of specification. Specifier Notes typically precede specification text; delete notes in final copy of specification. Trade/brand names with appropriate symbols typically are used in Specifier Notes; symbols are not used in specification text. Metric conversion, where used, is soft metric conversion. This MANU-SPEC specifies sliding automatic entrances. These products are manufactured by Stanley Access Technologies, LLC, a Stanley Security Solutions, Inc., product group. Revise MANU-SPEC section number and title below to suit project requirements, specification practices and section content. Refer to CSI MasterFormat for other section numbers and titles. SECTION- AUTOMATIC ENTRANCES GENERAL SUMMARY Section Includes: Automatic Entrance Doors. Automatic Entrance Door Assemblies. Components. Door Operators. Electrical Controls. Activation and Safety Devices. Hardware. Fabrication. Aluminum Finishes. Related Sections: Section [07 92 00 - Joint Sealants] [______]. Section [08 71 00 - Door Hardware] [______]. Section [08 80 00 - Glazing] [______]. Section [26 05 00 - Common Work Results for Electrical] [______]. Section [28 00 00 - Electronic Safety and Security] [______]. REFERENCES American Association of Automatic Door Manufacturers (AAADM). American Architectural Manufacturers Association (AAMA): AAMA 606.1 Voluntary Guide Specifications and Inspection Methods for Integral Color Anodic Finishes for Architectural Aluminum. AAMA