上海交大 dsp 课程ppt 第四章.pptVIP

EXAMPLE time-domain process of mirror-image filter Figure 4.27 Use linear interpolation actually 4.5.3 changing the sampling rate by a noninteger factor Figure 4.28 EXAMPLE Advantages of decimation after interpolation： 1.Combine antialiasing and reverse mirror-image filter 2.Lossless information for upsampling 4.5.4 application of multirate signal processing Figure 4.43 1.Sampling system：replace high-powered analog antialiasing filter and low sampling rate with low-powered analog antialiasing filter , oversampling and high-powered digital antialiasing filter, decimation. Transfer the difficulty of the realization of high-powered analog filter to the design of high-powered digital filter. FIGURE 4.44 2.reconstruction system：replace high-powered analog reconstructing filter with interpolation, high-powered digital reverse mirror-image filter and low-powered analog analog reconstructing filter. analysis and synthesis of sub band 3. filter bank In MP3, M=32，sub-band analysis filter bank is 32 equi-band filters with center frequency uniformly distributed from 0 to π ： MP3 coders use different quantization to realize compression for signals yi[n] in different sub-bands. example：compression for M=2 decimation an d interpolation to realize pitch scale 4.pitch scale：decimation or interpolation ，sampling rate of reconstruction is not changed. 4.5 summary requirement： frequency spectrum chart of interpolation and decimation 4.5.1 sampling rate reduction by an integer factor4.5.2 increasing the sampling rate by an integer factor4.5.3 changing the sampling rate by a noninteger fact 4.5.4 application of multirate signal processing exercises 4.15 (b)(c) 4.24(a)(b) 4.26 only for ωh= π /4 Requirements and difficulties： frequency spectrum chart of sampling and reconstruction comprehension and application of sampling theorem 4.2 discrete-time processing of continuous-time signals Figure 4.11 Figure 4.12 EXAMPLE conditions：LTI；no aliasing or aliasing occurred outside the p