毕业设计（论文）_110KV降压变电所电气一次部分及防雷保护设计.docVIP

110KV降压变电所电气一次部分及防雷保护设计 摘?要 随着现代文明的发展与进步，社会生产和生活对电能供应的质量和管理提出了越来越高的要求作为电能传输与控制的中间枢纽，变电所必须改变传统的设计和控制模式，才能适应现代电力系统、现代化工业生产和社会生活的发展趋势二次回路方案的确定及继电器保护的选择和整定防雷保护与接地装置的设计Buck 110KV electrical substation and a part of the design of lightning protection Abstract With the development and progress of modern civilization, put forward higher request of social production and life to the quality of power supply and management, as a middle pivot of power transmission and control, must change the traditional design and control mode of substation, to adapt to the development trend of modern power system, the modernization of industrial production and social life, substation is an important part of power system, the electrical equipment and distribution network at a certain wiring posed, it obtains the electric power from the electric power system, through its transformation, distribution, transportation and protection functions, the electricity safety, reliability, economy to each one electric field. First carries on the analysis computation load and non power compensation, load the required coefficient method, analysis and design the next main electrical wiring, according to transformer number 2, voltage grade, line 2 and line 6 back, side 110kV with the single bus, 35kV side using the single bus, according to the main wiring diagram select three short points and the normalized value of short circuit calculation, calculate the periodic component of short-circuit current effective value, short-circuit current maximum value and the value. Two determine the circuit scheme and selection of relay protection and setting, the design of lightning protection and earthing device, in part for the lightning protection design lightning strike by four independent lightning rod, for the Zinc Oxide induction lightning arrester, and calculate the lightning rod height. Key words：substation；transformer；main wiring；short circuit calculation 1. 绪论 1 1.1. 变电所的发展情况 1 1.2. 设计背景及主要内容 2 1.2.1. 环境