《AVR32074 Getting started with GCC for AVR32-32-bit》.pdfVIP

AVR32006 : Getting started with GCC for AVR32 Features 32-bit • This guide will give some tips and tricks for using the GNU Compiler Collection Microcontrollers (GCC) for developing C/C++ code for AVR32. • Optimization techniques for the compiler and linker is also provided • The guide applies to versions of GCC for AVR32 =4.2.1. Application Note 1 Introduction The goal of this guide is to quickly enlighten the developer on best practices for the ® development of code for AVR 32 microcontrollers, as well as giving some pointers to specific features of GCC relevant to AVR32. Most of the information in this document is available in the GCC manual (which is usually a part of the GCC installation) Note that when referring to commands in the AVR32 GNU toolchain we use the avr32-command form in the rest of this guide. If using the toolchain built for an ® AVR32 Linux target, these commands should be replaced with avr32-linux- command. Rev. 32074A-AVR-12/07 1.1 Command line options This document refers to command line options of GCC and will explain the relevant command line options for controlling code generation as well as explaining some of the best practices when compiling source code for an AVR32 microcontroller 1.2 Generating optimised code GCC has an extensive set of options for code-generateion, but for most users only