《BLUETOOTH COMMUNICATIONS》.pdfVIP

® BLUETOOTH COMMUNICATIONS APPLICABLE INSTRUMENT MODELS: 9565, 7575, TA465, EBT730, PH730, 8715 APPLICATION NOTE TSI- 150 The instrument features Bluetooth wireless communications for use with a Bluetooth-enabled computer or 8934 wireless printer. A computer can command the instrument to:  Reply with model and serial numbers of the instrument and the currently attached probe.  Reply with current values for all measurements to be logged.  Reply with logged data either for a particular TestID or all TestIDs.  Change the names of TestIDs used to log data. Bluetooth Communications Requirements Bluetooth communications between a TSI instrument and computer require Bluetooth communications and use of a terminal emulation program, such as HyperTerminal, be installed on the computer. This application note assumes that you already have Bluetooth communications installed on your computer. If your computer does not have Bluetooth communications, purchase and install a Bluetooth dongle or another means of Bluetooth communications. HyperTerminal is included in Windows® XP and earlier operating systems, but not in Windows Vista® or Windows® 7 operating systems.  For Windows® XP operating system or earlier, you can find HyperTerminal by clicking on the Start button, then All Programs, Accessories and finally Communications. If HyperTerminal is not installed on your computer, install it by opening the Control Panel, selecting Add or Remove Programs, selecting Add/Remove Windows Components, and choosing HyperTerminal.  For Windows Vista® and Windows® 7 operating systems, obtain and install a terminal emulation program. Purchase HyperTerminal from Hilgra